Automatically remove surface debris from your pond

With a skimmer, you'll never have to fish surface debris out of your pond with a landing net again. A skimmer works around the clock to remove surface water and send it straight to your filter via a pump.

The surface is cleared of coarse debris while the water is filtered, tackling both large and small dirt particles. All you need to do is occasionally empty leaves and other large debris from the skimmer basket.

No more excess waste nutrients from unwanted surface debris

When leaves, twigs, insects, and other debris fall into your pond, they eventually sink to the bottom where they decompose, causing waste nutrients to build up. This can lead to harmful substances and algae growth—especially in autumn when falling leaves are at their peak.

A skimmer automatically removes this extra debris before it has the chance to create waste nutrients in your pond. This keeps your pond cleaner and healthier with minimal effort.

Easy to install on the bottom of your pond

Placing and installing the BluSkimmer 12.000 is simple because it sits right on the bottom of your pond. The skimmer can function properly even at an angle of up to 7.5 degrees. You can easily anchor the BluSkimmer to the pond bed by weighting its base plate with stones, keeping it securely in place.

Suitable for almost any pond depth

Thanks to its telescopic tube, the skimmer is height-adjustable. You can set it so it aligns perfectly with your water surface, making it suitable for pond depths from 32 cm to 83 cm.

Suitable for ponds up to 40m²

The BluSkimmer can process between 8,000 and 16,000 litres of pond water per hour. Thanks to its wide reach, it is suitable for ponds with a surface area up to 40m².

Connect to a pond pump with a skimmer inlet

The BluSkimmer does not contain an internal pond pump. You connect the BluSkimmer to a pond pump with sufficient capacity, which will draw the water through the skimmer. You can use a pond hose between the BluSkimmer and the pond pump. The pond pump can then pump the water to a filter, such as a pressure filter.

The BluFlow 10.000 and the BluFlow 16.000 are suitable for use with this skimmer.